Why is the SignWeave™ polyester fabric material the best fabric for SEG Fabric?
Our SignWeave™ polyester fabric material provides a strong, thick fabric and a perfect surface to allow vibrant colors to be printed using our state of the art dye sublimation process. The finished product is a high quality, hard wearing and long lasting product. The strong 7.35 oz fabric material has a light absorbing matte finish to reduce glare making it perfect for indoor displays and photography as well as providing a great finish for outdoor signage.
Do you supply the aluminum frames for the SEG Fabric?We currently only supply the fabric for your aluminum frame. Our SEG Fabrics will fit any standard frame with a slot width of 4.5mm and minimum depth of 14mm.
Do you supply any other sizes of SEG Fabric?
The web page has a drop down list of heights and widths we can supply. These are the only sizes we supply for SEG Fabric.
What will I see on the other side of the printed Fabric Banner?
As we use a heavy 7.35 oz. fabric material there is only a small amount of bleed through from the print (compared to lighter duty fabric materials which can have a lot of print bleeding through them). So on the reverse side of the Fabric Banner you will see a very faint version of your printed design in reverse.
Can you supply backlit SEG Fabric?
At this stage we do not supply backlit SEG Fabric Frames.
What printing process do you use for the SEG Fabric?
We use a Dye Sublimation process to print the SEG Fabric in full CMYK color. Dye Sublimation is a method that transfers your design from a paper film to the fabric using a heat press method. The ink is pressed into the fabric to provide you with a vibrant long lasting fabric banner.
Can I use the SEG Fabric for photography?
The premium 7.35 oz. SignWeave™ polyester fabric material has a light absorbing matte finish which reduces glare and makes it perfect for photography.
What size is the silicone edge on the SEG Fabric?
The silicone edge is 13mm long x 3mm thick. It is designed to fit into a 4.5mm wide slot.
Will the design on the banner fade or rub off?
The SEG Fabric is printed using the latest state of the art dye sublimation process. The ink will last indefinitely indoors and will only fade when exposed to the sun for long periods. The ink locks into the fabric so is quite scratch resistant but care must be taken to avoid sharp objects that may tear the fabric.
How should the banner be stored?
We recommend that you ensure the banner is completely clean and dry, and then carefully folded for storage.
How do I remove creases from the SEG Fabric?
We recommend that you use a steamer to remove any creases from the polyester fabric. It is also possible to use a warm iron but important that you use an ironing cloth so that the iron does not contact the fabric.
Can I wash and dry the SEG Fabric?
The SEG Fabric is suitable for use in a washing machine on a gentle cycle using cold water - but please avoid using harsh detergents or bleach. Please do not place the fabric banner in a tumble dryer - only air dry the fabric banner and ensure it is completely dry before storing.
